Description
TRENDnet's DIN-Rail Fast Ethernet Industrial Switches feature a rugged IP30-rated metal enclosure. These industrial Ethernet switches are designed to withstand high levels of vibration and shock, and operate in both low and high temperatures in industrial environments from -40° to 75° C (-40° to 167° F). Redundant power inputs with overload protection on each industrial Ethernet switch minimize network downtime.
Installers and integrators can save equipment costs and reduce installation time with TRENDnet’s Fast Ethernet industrial switches, delivering up to 30W per port of PoE power and data over existing Ethernet cables. With PoE technology, users only need one set of cables to supply data and power from the unmanaged industrial PoE+ switch. With these unmanaged industrial PoE+ switches, easily network PoE devices such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV set-top boxes, access controls, and more.
PoE+ power supply
The 200W PoE+ power budget allows you to supply PoE+ power to up to four Power over Ethernet devices.
Secondary power supply
Dual power inputs provide redundant power with current overload protection and an alarm output relay to indicate power input failure.
Reinforced industrial design
It is equipped with a robust IP30-rated housing designed to withstand high levels of vibration and shock, and operates in a wide temperature range of -40 to 75° C (-40 to 167° F).
- 8 Fast Ethernet PoE+ ports
- Total available PoE power of 200W
- 1.6 Gbps switching capacity
- IP30 rated reinforced metal switch
- Includes DIN-rail mounting accessories and wall mounting brackets
- Wide operating temperature range, from -40 to 75° C (-40 to 167° F)
- Dual redundant power inputs with overload protection
- Alarm relay activated by power supply failures
- Power supply is sold separately (model TI-S24048)
- NDAA/TAA Compliant (US and Canada only)
SPECS
- Standard
- IEEE 802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE 802.3x
- IEEE 802.3af
- IEEE 802.3at
- Device interface
- 8 Fast Ethernet PoE+ ports
- Removable 6-pin terminal block
- LED indicators
- Wall mounting
- DIN-RAIL MOUNTING
- Grounding point
- Data transfer rate
- Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex)
- Performance
- RAM data buffer: 1MB
- Switching Mesh: 1.6Gbps
- MAC Address Table: 1K entries
- Forwarding rate: 0.744 Mpps (64-byte packet size)
- Special Features
- Reinforced components rated for extreme temperatures
- Dual redundant power inputs
- Supports 8KV electrostatic discharge protection
- Low profile design
- DC power supply
- Input: 48 – 56V DC
- Recommended power supply: TI-S24048 (sold separately)
- Maximum consumption: 5.76W (non-PoE)
- PoE
- Available PoE power: 200W
- Terminal block
- Redundant power inputs, alarm relay contact, 6 pins
- Wire range: 0.34 mm^2 to 2.5 mm^2
- Rigid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lbs – inch / 0.5 Nm / 0.56 Nm
- Cable thread length: 7 – 8mm
- Alarm relay contact
- Relay outputs with current carrying capacity of 1A, 24 V DC
- Open circuit mode when two power supplies are connected
- Short circuit mode when only one power supply is connected
- MTBF
- 510,304 hours
- Housing
- IP30 metal housing
- DIN-rail mounting
- Wall mounting
- Grounding point
- Operating temperature
- -40° – 75° C (-40° – 167° F)
- Humidity allowed
- Max. 95% non-condensing
- Dimensions
- 104 x 82 x 32mm (4 x 3.2 x 1.25 inches)
- Weight
- 486g (17.1 oz)
- Certifications
- EC
- FCC
- Shock (IEC 60068-2-27)
- Free fall (IEC 60068-2-32)
- Vibrations (IEC 60068-2-6)
- PACKAGE CONTENTS
- TI-PE80
- Quick Installation Guide
- Removable terminal block
- DIN-rail and wall mounting kit
