Description
TRENDnet's DIN-Rail Fast Ethernet Industrial Switches feature a rugged IP30-rated metal enclosure. These industrial Ethernet switches are designed to withstand high levels of vibration and shock, and operate in both low and high temperatures in industrial environments from -40° to 75° C (-40° to 167° F). Redundant power inputs with overload protection on each industrial Ethernet switch minimize network downtime.
Easy installation
No configuration required, just connect network devices to the industrial Ethernet switch
Secondary power supply
These industrial Ethernet switches feature dual power inputs to provide redundant power with current overload protection.
Reinforced industrial design
It is equipped with a robust IP30-rated housing designed to withstand high levels of vibration and shock, and operates in a wide temperature range of -40 to 75° C (-40 to 167° F).
- 8 Fast Ethernet ports
- 1.6 Gbps switching capacity
- Forwarding rate: 1.19 Mpps (64-byte packet size)
- IP30 rated reinforced metal switch
- Includes DIN-rail mounting accessories and wall mounting brackets
- Wide operating temperature range, from -40 to 75° C (-40 to 167° F)
- Dual redundant power inputs with overload protection
- Alarm relay activated by power supply failures
- Power supply is sold separately (model TI-M6024)
- Fanless design for silent operation
SPECS
- Standards
- IEEE802.3
- IEEE 802.3u
- IEEE 802.3ab
- IEEE802.3x
- Device interface
- 8-port fast ethernet
- Removable 6-pin terminal block
- LED indicators
- Wall mounting
- DIN Rail Mounting
- Grounding point
- Data transfer rate
- Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
- Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps (full-duplex)
- Performance
- RAM data buffer: 56KB
- Switching Mesh: 1.6Gbps
- MAC Address Table: 1K entries
- Forwarding rate: 0.744 Mpps (64-byte packet size)
- Special features
- Reinforced components rated for extreme temperatures
- Redundant power inputs
- Supports 8kV electrostatic discharge protection
- Low profile design
- DC power supply
- Input: 12 – 56V DC
- Recommended power supply: TI-M6024 (sold separately)
- Maximum consumption: 3W
- Terminal block
- Redundant power inputs, alarm relay contact, 6 pins
- Wire range: 0.34mm^2 to 2.5mm^2
- Rigid wire (AWG): 12-24/14-22
- Stranded wire (AWG): 12-24/14-22
- Torque: 5 lbs – inch / 0.5 Nm / 0.56 Nm
- Cable thread length: 7 – 8mm
- Alarm relay contact
- Relay outputs with current carrying capacity of 1A, 24 V DC
- Open circuit mode when two power supplies are connected
- Short circuit mode when connected to only one power supply
- MTBF
- 510,304 hours
- Housing
- IP30 metal housing
- DIN rail mounting
- wall mount
- Grounding point
- Operating temperature
- -40° – 75° C (-40° – 167° F)
- Humidity allowed
- Max. 95% non-condensing
- Dimensions
- 142 x 105 x 37mm (5.6 x 4.1 x 1.5 inches)
- Weight
- 635 g (22.5 oz)
- Certifications
- EC
- FCC
- Impact (IEC 60068-2-27)
- Free fall (IEC 60068-2-32)
- Vibrations (IEC 60068-2-6)
- IEC 61000-4-2
- IEC 61000-4-4
- IEC 61000-4-5
- PACKAGE CONTENTS
- TI-E80
- Quick Installation Guide
- Removable terminal block
- DIN rail and wall mounting kit
