Description
24 dedicated PoE+ ports (250W budget) for numerous applications
Compliance with 802.3af/at PoE+ standard supports up to 30W on each PoE port. Total 250W* PoE power budget for 24×10/100Mbps PoE+ ports makes it have a wide range of applications such as surveillance, offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, etc.
Software-defined networking (SDN) with cloud access
Omada’s Software Defined Networking (SDN) platform integrates network devices including access points, switches, and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network, all controlled from a single interface. Seamless wired and wireless connections are provided, ideal for use in hospitality, education, retail, offices, and more.
- 250W PoE: 24 802.3at/af-compliant PoE+ ports with a total power supply of 250W * .
- Gigabit Ports: 2 Gigabit RJ45 ports and 2 Gigabit RJ45/SFP Combo ports provide high-speed connections.
- Integrated into Omada SDN: Zero-Touch Provisioning (ZTP) ** , centralized cloud management, and intelligent monitoring.
- Centralized Management: Access to the cloud and Omada app for maximum convenience and easy management.
- Optimize voice and video applications: L2/L3/L4 QoS and IGMP snooping.
- HARDWARE FEATURES
- Standards and Protocols
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p, IEEE 802.3 af, IEEE 802.3at
- Interface
- 24 10/100 Mbps RJ45 ports
- (Auto Negotiation / Auto MDI / MDIX)
- 2 RJ45 ports of 10/100/1000 Mbps
- (Auto Negotiation / Auto MDI / MDIX)
- 2 Gigabit uplink RJ45/SFP combo ports
- Network Media10BASE-T: Category 3, 4, 5 UTP cable (maximum 100 m)
- 100BASE-TX / 1000Base-T: Category 5, 5e or higher UTP cable
- (maximum 100 m)
- 1000BASE-X: MMF, SMF
- Number of Fans 2
- Physical Security Lock Yes
- PoE Budget 250W
- Dimensions 17.3*7.1*1.7 in.(440*180*44 mm)
- Mounting
- Rack Mount
- Maximum Power Consumption
- 18.8 W (220 V / 50 Hz with no PD connected)
- 286.7 W (220 V / 50 Hz with 250 W PD connected)
- Max Heat Dissipation
- 64.1 BTU/hr (without PD connected)
- 977.6 BTU/h (220V/50Hz with 250W PD connected)
- PERFORMANCE
- Switching Capacity
- 12.8 Gbps
- Packet Forwarding Rate
- 9.5 Mpps
- MAC Address Table
- 8K
- Jumbo Frame
- 9216 Bytes
- SOFTWARE FEATURES
- Quality of Service
- 802.1p CoS/DSCP Priority
- • 8 priority queues
- • Priority schedule mode
- - SP (strict priority)
- - WRR (Weighted Round Robin)
- • Tail weight setting
- • Bandwidth Control
- - Port/flow based classification limit
- • Smoother performance
- • Actions by flows
- - Mirror (to compatible interface)
- - Redirect (to supported interface)
- - Tariff limit
- - QoS Observation
- • Storm control
- - Multiple control modes (kbps/ratio/pps)
- - Broadcast/Multicast/Unknown Unicast Control
- L2 Features
- Add a link
- - Static link aggregation
- - Up to 8 aggregation groups and up to 8 ports per group
- - LACP 802.3ad
- • Spanning Tree Protocol
- - 802.1D STP
- - 802.1w RSTP
- - MSTP 802.1s
- - STP Security: Loopback Detection, TC Protect, BPDU Filter/Protect, Root Protect
- • Loopback detection
- - Port based
- - VLAN based
- • Flow control
- - 802.3x flow control
- - HOL blocking prevention
- • Reflection
- - Port mirroring
- - Twelve fifty-nine at night
- - Many to one
- - Tx / Rx / Both
- - CPU duplication
- L2 Multicast
- Supports IGMP 511 groups (IPv4, IPv6)
- • IGMP Snooping
- - IGMP v1/v2/v3 Snooping
- - Quick exit
- - IGMP Snooping Query
- - IGMP Authentication
- • IGMP Authentication
- • MVR
- • MLD Inquiry
- - MLD v1/v2 Inquiry
- - Quick exit
- - MLD Inquiry Consultation
- - Static group configuration
- - Limited IP multicast
- • Multicast filtering: 256 profiles and 16 entries per profile
- IPv6 Support
- IPv6 double IPv4 / IPv6
- • Multicast Listening Detection (MLD)
- • IPv6 Neighbor Discovery (ND)
- • Path Maximum Transmission Unit (MTU) Discovery
- • Internet Control Message Protocol (ICMP) version 6
- • TCPv6 / UDPv6
- • IPv6 applications
- - DHCPv6 Client
- - Ping6
- - Tracert6
- - Telnet (v6)
- - IPv6 SNMP
- - IPv6 SSH
- - SSL IPv6
- - Http / Https
- - TFTP IPv6
- VLAN
- VLAN Group
- - Maximum VLAN groups 4K
- • 802.1Q tagged VLAN
- • MAC VLAN: 12 entries
- • VLAN Protocol: Protocol Template 16, VLAN Protocol 16
- • Private VLAN
- • GVRP
- • VLAN VPN (QinQ)
- - Port-based QinQ
- - Selective QinQ
- • Voice VLAN
- Access Control List• Time-based ACL
- • MAC ACL
- - Source MAC
- - Destination MAC
- - VLAN ID
- - User priority
- - Type of ether
- • IP ACL
- -Source IP
- - Destination IP
- - Fragment
- - IP Protocol
- - TCP flag
- - TCP/UDP port
- - TOS DSCP / IP
- - User priority
- • Combined ACL
- • ACL packet content
- • IPv6 ACLs
- • Policy
- - Reflection
- - Redirect
- - Tariff limit
- - QoS Observation
- • ACL is applied to the port/VLAN
- Security• IP-MAC Port Binding
- - DHCP Snooping
- - ARP Inspection
- - IPv4 source protection
- • IPv6-MAC-Port Link
- - DHCPv6 Snooping
- - ND Detection
- - IPv6 source protection
- • DoS Defense
- • Static/dynamic port security
- - Up to 64 MAC addresses per port
- • Broadcast/Multicast/Unicast storm control
- - kbps/ratio/pps control mode
- • Access control based on IP/Port/MAC
- • 802.1X
- - Port-based authentication
- - Mac-based authentication
- - VLAN assignment
- - MAB
- - Guest VLAN
- - Supports Radius authentication and accountability
- • AAA (including TACACS+)
- • Port isolation
- • Secure web management via HTTPS with SSLv3 / TLS 1.2
- • Secure command line interface (CLI) management with SSHv1/SSHv2
- IPv6• Dual IPv6 IPv4 / IPv6
- • Multicast Listening Detection (MLD)
- • IPv6 ACLs
- • IPv6 interface
- • Static IPv6 routing
- • IPv6 Neighbor Discovery (ND)
- • Path Maximum Transmission Unit (MTU) Discovery
- • Internet Control Message Protocol (ICMP) version 6
- • TCPv6 / UDPv6
- • IPv6 applications
- - DHCPv6 Client
- - Ping6
- - Tracert6
- - Telnet (v6)
- - IPv6 SNMP
- - IPv6 SSH
- - SSL IPv6
- - Http / Https
- - TFTP IPv6
- L3 Features
- 16 IPv4/IPv6 interfaces
- • Static routing
- - 48 static routes
- • Static ARP
- - 128 static entries
- • 316 ARP entries
- • Proxy ARP
- • Free ARP
- • DHCP Server
- • DHCP Relay
- - DHCP interface relay
- - DHCP VLAN Relay
- • L2 DHCP Relay
- Management• Web-based GUI
- • Command line interface (CLI) via console port, telnet
- • SNMPv1 / v2c / v3
- - Cheat / Report
- - RMON (1, 2, 3, 9 groups)
- • SDM template
- • DHCP/BOOTP Client
- • 802.1ab LLDP / LLDP-MED
- • Automatic DHCP installation
- • Dual image, dual configuration
- • CPU monitoring
- • Cable diagnosis
- • EEE
- • Password recovery
- • SNTP
- • System log
- MIBs• MIB II (RFC1213)
- • MIB interface (RFC2233)
- • Ethernet MIB interface (RFC1643)
- • Bridge MIB (RFC1493)
- • P/Q-Bridge MIB (RFC2674)
- • RMON MIB (RFC2819)
- • RMON2 MIB (RFC2021)
- • Radius Accounting Client MIB (RFC2620)
- • Radius Authentication Client MIB (RFC2618)
- • Remote Ping, Traceroute MIB (RFC2925)
- • Supports TP-Link private MIBs
- OTHERS
- Certifications
- CE, FCC, RoHS
- Package Contents
- TL-SL2428P
- Power cable
- Installation Guide
- Rack Mount Kit
- Rubber feet
- System Requirements
- Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux.
- Environmental Factors
- Working temperature: 0℃~50℃(32℉~122℉);
- Storage temperature: -40℃~70℃(-40℉~158℉)
- Operating humidity: 10%~90% non-condensing
- Storage humidity: 5%~90% non-condensing
