Description
The TL-SG1024D 24-Port Gigabit Desktop/Rack Switch
makes your transition to Gigabit Ethernet easier. All
ports support auto MDI/MDIX, you don't need to worry about the type
cable, just plug it in and go. Plus, with
Its innovative energy-efficient technology, the
TL-SG1024D can save up to 20%* in power consumption.
electricity, making it a solution
ecological for your network.
Gigabit Switch
With its 24 10/100/1000Mbps ports, the TL-SG1024D increases
greatly increases the capacity of its network, allowing the transfer
snapshot of large files. Therefore
users in the office, home, workgroup or work environments
Creative production can now send the largest files
weight, requiring greater bandwidth, more quickly.
Instantly transmit your graphics over the network,
CGI, CAD, or multimedia files.
TAKE CARE OF THE ENVIRONMENT WITH YOUR ETHERNET
Now you can take care of the environment when you upgrade your network
to gigabit! The new generation of Gigabit Switches
TL-SG1024D 24-port rack/desktop features the following:
latest and most modern efficiency technologies
energy that can greatly increase the capacity of
their network consuming much less energy. They adjust
automatically its energy consumption according to the
link status and cable length to limit traces
carbon from its network.
Disconnecting Inactive Ports
When a computer or other equipment on a network is turned off, the
corresponding port on a traditional switch continues
consuming a considerable amount of energy. The
TL-SG1024D can automatically detect the link status
of each port and reduce the energy consumption of the ports
inactive.
Energy savings depending on cable length
In theory, shorter cables consume less power.
less energy degradation throughout its life
length, however this is not the case in most
of the devices, which consume the same energy
regardless of whether your cable is 10 or 50 meters long. The
TL-SG1024D analyzes the length of the connected Ethernet cable and adjusts
consequently energy consumption, instead of maintaining
consumption in a conventional solution.
Easy to use
The automatic capabilities of this gigabit switch
make installation easy, just plug and play. No need to
need to configure. Auto MDI/MDIX eliminates the need for cables
crossed. The auto-negotiation of each port detects the
link speed of a network device (at 10, 100 or
1000Mbps) and makes an intelligent adjustment of compatibility and
optimal performance.
* Maximum energy savings compared to a switch
Conventional TP-LINK, actual savings may vary depending on the
terms of use.
Characteristics:
- Innovative energy efficiency technology that
save up to 20% of electricity
- Supports IEEE802.3X flow control for full-duplex mode and
backpressure for half-duplex mode
- Non-blocking switching architecture that sends and
filters packets at the speed that the cable allows for a
maximum performance.
- Switching capacity 48 Gbps
- Jumbo frame at 10K that improves the transmission of large
amount of data
- Auto MDI/MDIX eliminates the need for crossover cables.
- Supports self-learning and self-update of the
MAC address
- Store and forward switching
transmission)
- Auto-negotiating ports that provide a
Smart hardware integration at 10Mbps, 100Mbps and
1000Mbps .
- Desktop and rack design
- Plug and Play design for easy installation
Specs:
-
Standards and Protocols
IEEE802.3,
802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP
-
Basic Functions
- Wire-speed performance
- Self-learning and self-aging MAC address
- IEEE802.3X flow control for Full-duplex mode and
backpressure for Half-duplex mode
-
Backbound Bandwidth
48Gbps
-
MAC Address Table
8k
-
Forwarding speed
- 10Base-T: 14880pps/port
- 100Base-TX: 148800pps/port
- 1000BASE-T: 148800pps/port
-
Transmission method
Store-and-Forward
-
Ports
24 RJ45 ports with
10/100/1000Mbps auto-negotiation (Auto MDI/MDIX)
-
Network Media
- 10Base-T: Category 3, 4, 5 UTP cable (maximum
100m)
- EIA/TIA-568 100Ù STP (maximum 100m)
- 100Base-Tx: Category 5, 5e UTP cable (maximum
100m)
- EIA/TIA-568 100Ù STP (maximum 100m)
- 1000Base-T: Category 5, 5e UTP cable (maximum
100m)
- LED Indicators Power,
Connection/Activity
-
Safety and Emissions
FCC, CE
-
Dimensions (width x depth x height)
11.6*7.1*4.32cm.(294*180*44mm)
-
Environment
- Working temperature 0ºC ~ 40ºC
(32ºF~104ºF)
- Storage Temperature -40ºC ~ 70ºC
(-40ºF~158ºF)
- Operating Humidity: 10%~90%, Non-condensing
- Storage Humidity: 5%~90%, Non-condensing
-
Feeding
100-240VAC,
50/60Hz
