Description
52-Port Gigabit Metro Ethernet Switch DGS-1210-52/ME
Efficient and resilient Gigabit performance for Metro Ethernet applications.
- 48 10/100/1000BASE-T ports
- 4 SFP ports
- Comprehensive Layer 2 features including link aggregation, port-based Q-in-Q, and VLAN trunking
- Enhanced network security with IP-MAC Port Binding (IMPB), Access Control List (ACL), and IEEE 802.1X
- Integrated 6 kV surge protection, less than 50 ms ERPS recovery and Dying Gasp provide optimal reliability
Ideal for Metro Ethernet
The DGS-1210ME series Metro Ethernet switches feature a variety of port configurations, including 10/100/1000BASE-T RJ-45 ports, 1G SFP ports, and 10G SFP+ ports for increased network bandwidth. Surge protection, advanced Layer 2 features, and a suite of security and management tools make the DGS-1210ME series Metro Ethernet switches ideal for Metro Ethernet applications.
Efficient and resilient
For mission-critical environments, the DGS-1210ME Series Metro Ethernet switches support IEEE 802.1D 2004 Edition Spanning Tree Protocols (STP), 802.1w, and 802.1s. The switches also support IEEE 802.3ad Link Aggregation, which increases bandwidth and redundancy for higher availability. The series also features IEEE 802.1p Quality of Service (QoS), enabling real-time traffic classification in Weighted Round Robin (WRR) and strict priority levels assigned to eight queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.
Security and authentication
The DGS-1210ME series supports IEEE 802.1X host/port-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict network access control. The IP-MAC-Port Binding (IMPB) feature allows administrators to further enhance user access control. The built-in D-Link Safeguard Engine™ protects the CPU against broadcast, multicast, and unicast flooding. Additionally, the Access Control List (ACL) feature enhances network security and switch performance.
Multicast Applications
The DGS-1210ME series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast egress, and multicast traffic shaping for specific ports. With L2 multicast support, the DGS-1210ME series is ready and capable of handling growing IPTV applications.
Management capabilities
An easy-to-use web interface gives administrators access to advanced management features such as DHCP auto-configuration, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises device capabilities and identity on the local network, allowing administrators to better manage their network topology. Each port also supports cable diagnostics to remotely troubleshoot cable length and functionality issues.
Traffic and bandwidth control
Built-in bandwidth control allows network administrators to define performance levels for ingress and egress bandwidth. It provides a minimum granularity of 64 kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 kbps for egress queue bandwidth. The DGS-1210ME series also supports traffic shaping, which optimizes overall performance, while port mirroring helps administrators perform traffic diagnostics and track network performance.
Specs
- 1000 Base-T 48 interface
- 1000M SFP interface 4
- Console port Yes
- 10/100/1000BASE-T ports 48
- SFP4 ports
- Switch capacity 104 Gbps
- Max. Packet forwarding rate 77.4 megas per second
- Dimension 440mm x 210mm x 44mm
- Weight 3.31 kilograms
- Operating temperature -5 - 50°C
- Storage temperature -20-70°C
- Operation Humidity 0% - 95% relative humidity
- Storage humidity 0%~95%RH
- Operating altitude 1500 meters
- Maximum power consumption 38.85 W/100 V
38.35W/240V
- Standby power consumption 21.72 W/100 V, 21.49 W/240 V
- Maximum heat dissipation 132.08 BTU/h
- MTBF 381,999 hours
- Store and forward Yes
- CPU speed 400MHz
- RAM size 128MB
- Flash memory size 32MB
- Packet buffer size 3.0MB
- Power input 100-240 VAC
- Comply with RoHS 6 Yes
- Energy Efficient Ethernet (EEE) Yes
- Link State Power Saving Yes
- Energy saving by LED shutdown Yes
- Power saving by port closure Yes
- Power saving by system hibernation Yes
- MAC address table size 16K
- 802.3x Flow Control Yes
- Head of Line (HOL) Blocking Prevention Yes
- 802.1D Spanning Tree (STP) Yes
- 802.1w Rapid Spanning Tree (RSTP) Yes
- Multiple Spanning Tree (MSTP) 802.1s Yes
- BPDU Filtering Yes
- Root restriction Yes
- G.8032 ERPS Yes
- 802.1AX Link Aggregation Yes
- 802.3ad Link Aggregation Yes
- Link Aggregation Group per Device 8
- Maximum port per link aggregation group 8
- Flow-based mirroring (ACL) Yes
- Port Mirroring Yes
- Giant frame 9,216 bytes
- Loopback Detection (LBD) Yes
- L2 Protocol Tunnel Yes
- IGMP Snooping Yes
- IGMP maximum snooping groups 1024
- IGMP Snooping Fast Exit Yes
- IGMP Authentication Yes
- IGMP Accounting Yes
- MLD spying Yes
- MLD Spy Groups Yes
- MLD Snooping Quick License Yes
- VLAN 802.1Q Yes
- VLAN Groups Yes
- Port-based VLAN Yes
- VLAN based on 802.1v protocol Yes
- MAC-based VLAN Yes
- GVRP Yes
- Dual VLAN (Q in Q) Yes
- VLAN Translation Yes
- ISM VLAN (Multicast VLAN) Yes
- Asymmetric VLAN Yes
- Private VLAN Yes
- VLAN Trunk Yes
- IP Interface Yes
- Maximum number of IP interfaces 4
- ARP Yes
- ARP Entries Yes
- Free ARP Yes
- ND Tickets Yes
- Default Route Yes
- Static Route Yes
- Limited IP Multicast (IGMP Filtering) Yes
- Tail number Yes
- Class of Service (CoS) Yes
- Two-speed, three-color display (trTCM) Yes
- 802.1p Priority Observation Yes
- Note Terms of Service/DSCP Yes
- Rate Limiting Yes
- Queue management Yes
- Strict Priority Queue (SPQ) Yes
- Weighted Round Robin (WRR) Yes
- Simple random early detection (SRED) Yes
- Port-based bandwidth control Yes
- Flow-based bandwidth control Yes
- Queue-based bandwidth control Yes
- Maximum Access Control List (ACL) Entries Yes
- MAC Access List Yes
- IP Access List Yes
- IPv6 Access List Yes
- User defined access list Yes
- Time-based ACL Yes
- CPU interface filtering Yes
- SSH Yes
- SSL Yes
- Port Security Yes
- Broadcast/Multicast/Unicast Storm Control Yes
- Traffic segmentation Yes
- IP-MAC Port Binding (IMPB) Yes
- DHCP Snooping Yes
- IPv6 Spying Yes
- IPv6 Inspection ND Yes
- Duplicate Address Detection (DAD)Yes
- D-Link Protection Engine Yes
- DHCP Server Detection Yes
- DHCP Client Filtering Yes
- Protection against BPDU attacks Yes
- DoS Attack Prevention Yes
- 802.1X Yes
- Port-based 802.1X authentication Yes
- 802.1X Host-Based Authentication Yes
- MAC-based access control (MAC) Yes
- Host-based MAC authentication Yes
- Guest VLAN Yes
- Microsoft® NAP Support Yes
- Privilege level for administration access Yes
- RADIO Yes
- RADIO Accounting Yes
- TACACS+ Yes
- TACACS+ Accounting Yes
- Trusted Host Yes
- Cable Diagnostics Yes
- Ethernet Link 802.3ah OAM Yes
- Unidirectional D-link Detection (DULD) Yes
- Connectivity Fault Management (CFM) 802.1ag Yes
- Y.1731 OAM Yes
- Optical Transceiver Digital Diagnostic Monitoring (DDM) CLI
- Network Time Protocol (NTP) Yes
- Simple Network Time Protocol (SNTP) Yes
- Web-based GUI Yes
- Telnet Server Yes
- Telnet Client Yes
- SNMP Yes
- SNMP Trap Yes
- System log Yes
- FTP Client Yes
- TFTP Client Yes
- RMONv2 Yes
- RMONv1 Yes
- SMTP YES
- LLDP Yes
- LLDP-MED Yes (for 28P/ME)
- DHCP Auto Configuration Yes
- D-Link Discovery Protocol (DDP) Yes
- DHCP/BootP Client Yes
- Dual images Yes
- DHCP Relay Yes
- Editable login banner Yes
- Dual Configurations Yes
- Debug Command Yes
- Editable system message Yes
- Password Recovery Yes
- Password encryption Yes
- Whistle Yes
- Tracking route Yes
- D-Link Network Assistant Yes
- Surge/Lightning Protection Yes
- Surge/Lightning Protection (All Ethernet Ports) Yes
- SSH Yes
- SSL Yes
