Description
SPS ADVANCE RT2: Efficient protection for entry-level servers and IT equipment
The SPS ADVANCE RT2 series from Salicru is a range of UPSs
Line-interactive technology with sinusoidal output voltage and convertible tower/rack format, with a height of only 2U for all the
powers. Also, the output power factor 0.9 and compatibility with APFC (Active Power Factor Correction) type loads make it
They become the best option for any type of load to be protected.
Applications: Flexibility and versatility in protecting IT environments
The features of the SPS ADVANCE RT2 series make it a very versatile solution to protect a wide range of IT equipment, from basic servers, routers, switches, hubs, point-of-sale,... with high power density requirements and/or installation in server/communications racks.
Benefits
- Line-interactive technology with sinusoidal output.
- AVR permanent stabilization.
- Output power factor PF= 0.9.
- Control panel with LCD screen and keyboard, adjustable.
- Convertible tower/rack format (2U).
- Includes pedestal (pedestal mount) and ears (rack mount).
- Range extensions available for all power ratings.
- UPS models with extra charger for extended battery life.
- RS-232/USB-HID interface.
- Downloadable monitoring software for Windows, Linux and Mac.
- Smart slot for SNMP/potential-free contacts/MODBUS.
- ADSL/fax/modem protection.
- EPO – emergency stop.
- Programmable outputs for critical/non-critical loads.
- Manual and automatic battery test.
- Smart battery charger that shortens the average recharge time.
- Recharging the batteries with the equipment turned off.
- SLC Greenergy solution.
SPECS
-
TECHNOLOGY
- Line-interactive
- FORMAT
- Convertible Tower/Rack (2U)
- ENTRANCE
- Nominal voltage
- 208 / 220 / 230 / 240 V
- Voltage range 100% load
- 170 ÷ 280 V
- Stabilizer
- AVR (Buck & Boost)
- Nominal frequency
- 50/60Hz (auto-detection)
- Frequency range
- ±5 Hz
- Auto frequency detection
- Yeah
- Protection
- Fuse (800/1100) or resettable thermal (1500/2000/3000)
- EXIT
- Power factor
- 0.9
- Nominal voltage
- 208 / 220 / 230 / 240 V
- Voltage accuracy (battery mode)
- ±1.5%
- Power (VA/W)
- 1500 / 1350
- Total Harmonic Distortion (THDv)
- <2% linear load / <5% non-linear load
- Waveform (battery mode)
- Pure sinusoidal
- Frequency
- 50/60 Hz (same as input)
- Frequency accuracy (battery mode)
- ±0.1Hz
- Permissible overloads Battery mode
- <120% off at 1 min / <150% off at 10 s
- Permissible overloads Online mode
- <120% off at 5 min / <150% off at 10 s / >150%: 1 s
- Type of shots
- IEC
- No. of departures
- 8
- Programmable sockets
- Yes, for critical/non-critical loads (4/4)
- BATTERY
- Battery Type
- Sealed Pb-Ca, AGM, maintenance-free
- Type of load
- I/U (Constant Current / Constant Voltage)
- Recharge time
- 4 hours at 90%
- Battery test
- Automatic at each start + one per week
- CHARGER
- Temperature voltage compensation
- Yeah
- COMMUNICATION
- Ports
- RS-232/USB-HID
- Smart Slot
- For SNMP/potential-free contacts/MODBUS
- Monitoring software
- For Windows, Linux and Mac family
- INDICATIONS
- Guy
- LCD + keyboard
- Values
- Input and output voltage, power and frequency / Battery voltage / % battery charge / % charge / Operating mode / Fault / Discharge time / Mute
- Operating modes
- Normal / Stabilization (AVR) / Battery / Failure
- Alarm
- Battery / polarity / low battery / overload / fault
- Acoustics
- Every 10 s for battery operation Every 2 s for Low Battery/Polarity Every 1 s for Overload Continuous for Fault
- Failed
- LCD Display
- OTHER FUNCTIONS
- Cold-start (battery start)
- Yeah
- Emergency shutdown (EPO)
- Yeah
- Transient protector for ADSL/fax/modem
- Yeah
- Green-function
- Yes, automatic stop in battery mode with load <5%
- Smart fan speed
- Yes, intelligent fan speed control
- Site wiring fault
- Yes, detection of phase-neutral rotation error and/or absence of ground
- GENERAL
- Working temperature
- 0º C ÷ 40º C
- Relative humidity
- Up to 95%, non-condensing
- Maximum working altitude
- 2,400 m above sea level (power degradation up to 5,000 m)
- Acoustic noise at 1 meter
- < 45dB
- REGULATIONS
- Security
- EN IEC 62040-1
- Electromagnetic compatibility (EMC)
- EN IEC 62040-2 (C2)
- Operation
- EN IEC 62040-3
- Quality and Environmental Management
- ISO-9001 & ISO-14001
- DIMENSIONS
- Depth (mm)
- 510
- Width (mm)
- 438
- Height (mm)
- 88
- WEIGHT
- Weight (kg)
- 19.5
