Description
9dBi Outdoor CPE on 2.4GHz at 300Mbps
It incorporates dual-polarized and directional 9dBi 2x2 MIMO antennas
Adjustable transmission power from 0 to 20dBm.
System-level optimizations for long-distance wireless transmission of more than 5 kilometers range
TP-LINK Pharos MAXtream TDMA (Typical Network Division Multiple Access) technology
over time) improves product performance, capacity and
latency, making it ideal for PTMP applications
Centralized Management System – Pharos Control
Operation modes: AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP)
Passive PoE adapter allows up to 60 meters (200 feet) of
PoE implementation and allows the device to be remotely reset
2.4GHz 300Mbps 9dBi Outdoor CPE
Enterprise hardware
With Qualcomm Atheros level chipsets, high gain antennas and
High quality material, specially designed housing and PoE power supply, CPE210 is
specially designed for outdoor use and can operate without
problems in almost any climate, with operating temperatures
ranging from -40℃ (-40℉) to +70℃ (158℉).
Advanced antenna system
Built-in high gain dual polarization antenna
Dedicated metal reflector ensures higher gain and lower noise interference
5 km + Wireless data transmission
Specially designed for outdoor use, ideal for streaming
Wireless data over 5km long distance, tested in the
field.
TP-Link MAXtream TDMA Technology
As network scale increases, wireless competition and
collisions between CPEs and base stations will be so huge
that the actual network performance will decrease, which will have an impact
serious impact on the end-user experience. To mitigate these effects,
The CPE210 uses MAXtream TDMA technology
Pharos Control - Centralized management system
The CPE210 also comes equipped with management software
centralized that helps users easily manage all the
devices on your network from a single PC: Pharos Control. Features like
Device discovery, status monitoring, update
Firmware and network maintenance can be managed using Pharos
Control.
PharOS
The easy-to-use web-based management system allows professionals to make more specific settings
- HARDWARE FEATURES
- Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
- Memory: DDR2 RAM 64MB, Flash 8MB
- Interface: 1 10/100Mbps shielded Ethernet port (LAN0, Passive PoE Input)
- 1 Ground terminal
- 1 Reset Button
- Power Supply: Passive PoE Adapter via LAN0 (+4.5pins; -7.8pins)
- Voltage Range: 16-27VDC
- Power Consumption: Maximum 5 Watts
- Note: When configured using the passive POE adapter,
The power obtained from the power supply will vary depending on
the length of the connecting cable.
- Dimensions: 224 x 79 x 60 mm
- Antenna Type: 9dBi 2x2 MIMO Dual Polarized Directional Antenna
- Beam Width: 65° (H-Plane) / 40° (E-Plane)
- Note: For more details, please refer to the data sheet
- Protection: 15KV ESD Protection
- 6000V lightning protection
- Housing: ASA stabilized plastic material for outdoor use
- IPX5 waterproof certified
- WIRELESS FEATURES
- Wireless Standards: IEEE 802.11b/g/n (with Pharos MAXtream disabled)
- Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
- Wireless Speed: Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz, Dynamic)
- Up to 72.2Mbps (10MHz, Dynamic)
- Up to 36.1Mbps (5MHz, Dynamic)
- Frequency: 2.4~2.483GHz
- Note: Available operating frequencies may vary.
depending on the limitations of the countries or regions where it is used
this device.
- Transmitting Power: 25dBm/316mw (power adjustable up to 1dBm)
- Note: Maximum transmission power may vary depending on the
different channels depending on the limitations of the countries or
regions where the device is used.
- SOFTWARE FEATURES
- Wireless Configurations: Pharos MAXtream TDMA Technology
- 802.11b/g/n modes
- Selectable bandwidth: 5/10/20/40MHz
- Automatic channel selection
- Transmission power control
- Dynamic Frequency Selection (DFS)
- WDS enabled/disabled
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, 64/128/152-bit WEP encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN tagging (AP mode only)
- Distance/ACK Timeout Setting
- Filtering using MAC addresses over WiFi
- Advanced wifi features:
- Beacon Interval/RTS Threshold/Fragmentation
- Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
- Management: Remote discovery and management through Pharos control applications
- HTTP/HTTPS Web-Based Management
- System Log
- SNMP(v2c) Agent
- Ping Watch Dog
- Dynamic DNS
- SSH Server
- System Tools: Wi-Fi Signal Quality Indicators:
- Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed test
- Ping
- Traceroute
- System Level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications
- Hardware Watchdog
- POE ADAPTER FEATURES
- Dimensions(W*D*H): 110*57*33.5mm
- Interfaces: 1 AC jack with ground
- 1 10/100Mbps shielded Ethernet port (Power + Data)
- 1 10/100Mbps shielded Ethernet port (Data)
- Button: Remote Reset Button
- Power Status LEDs: Green
- Input: 100-240VAC, 50/60Hz
- Output: 24VDC, 0.6A Max
- +4, 5pins; -7, 8pins. (Supports up to 60m Power over Ethernet)
- Efficiency: >80%
- Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
- OTHERS
- Certifications: CE, FCC, RoHS, IPX5
- Package Contents: Wireless Outdoor CPE
- 24V 0.6A Passive POE Adapter
- Mounting Straps
- Power Cable
- Installation Guide
- System requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
- Note: We recommend that you use one of the following browsers
web for an improved user experience: Google Chrome, Safari or
Firefox. Internet Explorer is not recommended.
- Environmental Factors: Operating temperature: -40°C~70°C (-40℉~158℉)
- Storage temperature: -40℃~70℃ (-40℉~158℉)
- Operating humidity: 10%~90% non-condensing
- Storage humidity: 5%~95% non-condensing
