Description
13dBi 5GHz 300Mbps Outdoor CPE
13dBi 2x2 Dual-Polarized Directional MIMO Antennas
Adjustable transmission power from 0 to 23 dBm.
System-level optimizations for wireless transmission over 15 kilometers range
TP-LINK Pharos MAXtream technology
TDMA(Time-Division-Multiple-Access) improves product performance,
capacity and latency, ideal for PTMP applications
Centralized Management System - Pharos Control
Operation modes: AP / Client / AP Router / AP Router Client (WISP)
Passive PoE Adapter supports a maximum of 60 meters (200 feet) of
PoE implementation and allows the device to be remotely reset
Enterprise hardware
With Qualcomm Atheros level chipsets, high gain antennas and
High quality material, specially designed housing and power supply
PoE power supply, CPE510 is specially designed for use in
outdoors and can operate without problems in almost any climate, with
Operating temperatures ranging from -40℃ (-40℉) to +70℃
(158 ℉).
Advanced antenna system
Built-in high gain dual polarization antenna
Dedicated metal reflector ensures higher gain and lower noise interference
15 km + Wireless data transmission
Specially designed for outdoor use, ideal for streaming
long distance wireless data over 15km, tested in the
field.
TP-Link MAXtream TDMA Technology
As network scale increases, wireless competition and
collisions between CPEs and base stations will be so huge that
the actual network performance will decrease, which will have an impact
serious impact on the end-user experience. To mitigate these effects,
The CPE510 uses MAXtream TDMA technology.
Pharos Control - Centralized management system
CPE510 also comes equipped with management software
centralized that helps users easily manage all the
devices on your network from a single PC: Pharos Control. Features like
Device discovery, status monitoring, update
Firmware and network maintenance can be managed using Pharos
Control.
PharOS
The easy-to-use web-based management system allows professionals to make more specific settings
-
HARDWARE FEATURES
- Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
- Memory: DDR2 RAM 64MB, Flash 8MB
- Interface: 1 Shielded 10/100Mbps Ethernet Port (LAN0, Passive PoE In)
- 1 Ground Terminal
- 1 Reset Button
- Power Supply: Passive PoE Adapter via LAN0 (+4.5pins; -7.8pins)
- Voltage Range: 16-27VDC
- Power Consumption: Maximum 9.8 W
- Note: When configured using the passive POE adapter,
The power obtained from the power supply will vary depending on
the length of the connecting cable.
- Dimensions: 224 x 79 x 60 mm
- Antenna Type: 13dBi 2x2 Dual Polarized Directional Antenna
- Beam Width: 45° (H-Plane) / 45° (E-Plane)
- Note: For more details, please refer to the data sheet
- Protection: 15KV ESD Protection
- 6000V lightning protection
- Housing: ASA stabilized plastic material for outdoor use
- IPX5 waterproof certification
- WIRELESS FEATURES
- Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
- Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
- Wireless Speed: Up to 300Mbps (40MHz, Dynamic)
- Up to 144.4Mbps (20MHz, Dynamic)
- Up to 72.2Mbps (10MHz, Dynamic)
- Up to 36.1Mbps (5MHz, Dynamic)
- Frequency: 5.15~5.85GHz
- Note: Available working frequency may vary depending on
of the limitations of the countries or regions where it is in use
the device.
- Transmitting Power: 27dBm/500mw (Adjustable Power up to 1dBm)
- Note: Maximum transmission power may vary by
different channels depending on the limitations of the countries or
regions in which the device is used.
- SOFTWARE FEATURES
- Wireless Configurations: Pharos MAXTream TDMA Technology
- 802.11a/n modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Power Transmission Control
- Dynamic Frequency Selection (DFS)
- WDS On/Off
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption and 64/128/152-bit WEP encryption
- SSID Broadcast On/Off
- Multi-SSID with VLAN tagging (AP mode only)
- Distance/ACK timeout settings
- Wireless MAC Address Filtering
- Advanced Wireless Options:
- > Beacon Interval/RTS Threshold/Fragmentation
- >Threshold/ DTIM Interval/ AP Isolation/Short GI/Wi-Fi Multimedia
- Management: Remote detection and management through the Pharos Control application
- HTTP/HTTPS Web-Based Management
- System Log
- SNMP(v2c) Agent
- Ping Watch Dog
- Dynamic DNS
- SSH Server
- System Tools: Wireless Signal Quality Indicators:
- Signal Strength / Noise / Transmit CCQ / CPU / Memory
- Monitoring: Throughput / Stations / Interfaces / ARP / Routes / WAN / DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
- System Level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications
- Hardware watchdog
- POE ADAPTER FEATURES
- Dimensions(W*D*H): 110*57*33.5mm
- Interfaces: 1 AC jack with ground
- 1 Shielded 10/100Mbps Ethernet Port (Power + Data)
- 1 Shielded 10/100Mbps Ethernet Port (Data)
- Button: Remote Reset Button
- Power Status LEDs: Green
- Input: 100-240VAC, 50/60Hz
- Output: 24VDC, 1.0A Max
- +4, 5pins; -7, 8pins. (Supports up to 60m Power over Ethernet)
- Efficiency: >80%
- Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
- OTHERS
- Certifications: CE, FCC, RoHS, IPX5
- Package Contents: Outdoor Wireless CPE
- 24V 0.5A Passive PoE Adapter
- Mounting Straps
- AC Power Cable
- Installation Guide
- System requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
- Note: We recommend that you use one of the following
Internet browsers for an improved user experience: Google
Chrome, Safari and Firefox. Internet Explorer is not recommended.
Explorer.
- Environmental Factors: Operating Temperature: -30°C~70°C (-22℉~158℉)
- Storage Temperature: -40℃~70℃ (-40℉~158℉)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~95% non-condensing
