Description
Kingston ValueRAM 32GB 2666MHz DDR4
This document describes the ValueRAM KVR26S19D8/32 memory module, a 4GB x 64-bit (32GB), 2Rx8, Non-ECC, DDR4-2666 CL19 SDRAM (Synchronous DRAM) memory module based on sixteen 2GB x 8-bit FBGA components.
The SPD is programmed to the JEDEC standard DDR4-2666 latency of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contacts.
Specs
- VDDQ = 1.2 V typical
- VPP = 2.5 V typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-chip termination (ODT) for data, strobe and mask signals
- Low Power Self-Refresh (LPASR)
- Data Bus Inversion (DBI) for data bus
- On-chip VREFDQ generation and calibration
- Double rank
- Integrated I2 serial presence detect (SPD) EEPROM
- 16 internal benches; 4 groups of 4 benches each
- Fixed burst cutoff (BC) of 4 and burst length (BL) of 8 via mode register set (MRS)
- BC4 or BL8 selectable on the fly (OTF)
- Pass-through topology
- Address and control command bus terminated
- PCB: Height 1.18” (30.00 mm)
- RoHS compliant and halogen free
