Description
Get your laptop or small form factor device equipped with Kingston FURY Impact DDR4 SODIMM and minimize system lag. Ready for AMD Ryzen and compatible with Intel XMP, in capacities up to 64GB, FURY Impact DDR4 Plug N Play runs automatically overclocks to the highest published frequency up to 3200MHz to support the most advanced CPU technologies from Intel and AMD. Slot in the thin black PCB for faster boot-up, no BIOS setup required. Upgrade your motherboard's performance system for quiet, efficient and heat-free operation thanks to the low voltage (1.2 V) of FURY Impact DDR4.
- High performance SODIMM
- Plug N Play automatic overclocking function
- Intel XMP Ready Profiles
- Ready for AMD Ryzen
- Better performance with lower power consumption
- Slim format, elegant design
High performance SODIMM
Maximize your memory and power through gaming, multitasking, and rendering.
Plug N Play automatic overclocking function
Impact DDR4 automatically overclocks to the highest published frequency.
Intel XMP Ready Profiles
Our engineers have predefined Intel Extreme Memory Profiles (XMP) designed to maximize the performance of our memory modules, reaching speeds of up to 3200 MHz.
Ready for AMD Ryzen
Get AMD Ryzen-ready memory that will seamlessly integrate with your AMD-based SODIMM-compatible system. Reliable, compatible performance to boost your system.
Better performance with lower power consumption
Run your system efficiently and without overheating thanks to the low power consumption (1.2V) of Impact DDR4 modules.
- Characteristics
- FURY KF426S15IB/8 is a 1G x 64-bit (8GB) DDR4-2666 CL15
-
SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module.
-
Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.
- Each module has been tested to run at DDR4-2666 with low latency timing of 15-17-17 at 1.2V.
-
Additional time parameters are shown in the section
-
Plug-N-Play (PnP) timing parameters below.
- The JEDEC electrical and mechanical standard
- Power supply: VDD = 1.2V typical
- VDDQ = 1.2 V typical
- VPP = 2.5 V typical
- VDDSPD = 2.2V to 3.6V
- On-die termination (ODT)
- 16 internal benches; 4 groups of 4 benches each
- Bi-directional differential data strobe
- 8-bit preload
- On-the-fly burst length (BL) switch BL8 or BC4 (Burst Chop)
- Height 1.18 '(30.00 mm)
- Specs
- Capacity 8 GB
- Frequencies 2666 MHz
- CL15 latencies
- Voltage 1.2 V
- Service temperatures 0 °C to 85 °C
- Dimensions 69.6 mm x 30 mm
